Squeezers for adhesives and silicones - overview
When squeezing silicones or tubes, we have a choice:
- manual squeezers,
- battery squeezers,
- pneumatic squeezers,
Hand squeezers for silicones and masses
Electric battery gun
If we want to get more precision - we use battery guns. The batteries in good models should be lithium-ion. They should have speed regulation - which means that we can squeeze faster or slower. Remember to adjust the speed to the density of your product. This type of device is very efficient and convenient to use. Such squeezers can also be found in the 1: 1 and 10: 1 systems. Some models have a pressing force of up to 460 kg. See all models of cordless squeezers. Detailed instructions for the operation of such a squeezer are discussed in the recording.
Pneumatic industrial squeezer
Recommended for production needs where continuous work is essential. For proper operation, pressurized air is required (you can buy such a compressor in a supermarket). Squeezers have a pressure regulator, air feeding. They are usually light and handy. The device allows for precise feeding of the product and repeatability of the portions. The working pressure is 5 bar. Check out the different models.
When you need precision, there is one more alternative. Tubes 30/50 ml and a special squeezer. Dedicated to small portions. You can choose a dosing needle that will make it easier to apply. The entire set has been completed and discussed in the film.
See the recording at the bottom of this post.
You can watch the entire video below. Feel free to ask any questions in the comments.
Comments