Thermal knife for cutting ribbons S3

RNTR-S3 thermal knife for cutting ribbons. Simple design without temperature control reduces the risk of device failure. The knife is equipped with a 5 cm blade that cuts lines, strings and even thicker bands without much problem. Just turn on the device and you can start working after a few seconds. Perfect for amateur or semi-professional applications. The cut materials are fused, which completely eliminates the possibility of delamination. The edges of the cut are even and aesthetic. The RNTR-S3 thermal knife is a handy and very light model. The advantage of the knife is the ability to work 2-3 hours non-stop. Used with medium load for strings and tapes up to 4-5 cm wide. Advantages: temperature-resistant blade, aesthetic cutting edges, light and durable construction, simple operation, low risk of failure or damage, wide range of applications. Application for cutting: ribbons, cords, tapes, ropes, belts. Specifications: round blade attachment width 5cm. dimensions: 105 x 120 x 80 mm, power 35 W, blade temperature approx. 600 ° C, power cord length 1 m. NOTE: The maximum operating time of the device without cooling down is 2 hours. Until then, a break of 30 minutes - 1 h should be taken to cool the device down.