RTM-2 brazing torch

MAP PRO RTM-2 gas burner designed for installers and in all places where a single burner heats up surfaces for too long. The double tip allows you to achieve greater efficiency, you can weld any pipe diameter. Very easy to use, no tools required for operation. It allows you to work in any temperature and position. Due to the brass elements, the parameters of the gas burner do not change over time. It is possible to unscrew the tip and work on only one. Suitable as a torch for soldering copper and aluminum. Burner unavailable - Check RTM-027 model here. Characteristics: reaches a temperature of over 2000 ° C thanks to the swirl flame, the tip rotates in the range of 360 ° Working time on one cylinder up to 2 hours. smooth flame regulation innovative gas shut-off valve operation without tools 9.7 mm nozzle Application: soft soldering and hard soldering of copper pipes with a diameter of up to 32 mm and larger heating, surface heating, melting plastics, melting low-temperature metals, burning and activating surfaces, bending plastics and laminated materials, helping to unscrew screws, bolts, etc. The use of MAP gas allows for more efficient work than with propane butane and, most importantly, not contaminating the heated surface, therefore the brazed surface is stronger and the surface is heated much faster