Stationary thermal knife S3

The RNTR-S3 thermal knife is the least advanced, but very efficient knife for cutting plastics from the entire RNTR series. Simple design without temperature control reduces the risk of device failure. The knife is equipped with a 5 cm blade that cuts lines, strings and even thicker bands without much problem. Just turn on the device and you can start working after a few seconds. Perfect for amateur or semi-professional applications. The cut materials are fused, which completely eliminates the possibility of delamination. The edges of the cut are even and aesthetic. The RNTR-S3 thermal knife is a handy and very light model. The advantage of the knife is the ability to work 2-3 hours non-stop. Used with medium load for strings and tapes up to 4-5 cm wide. Advantages: - temperature-resistant blade, - aesthetic cutting edges, - light and durable construction, - simple operation, - low risk of failure or damage, - wide range of applications. Application for cutting: strings, tapes, ropes, belts. Specifications: round blade attachment width 5cm. dimensions: 105 x 120 x 80 mm, power 35 W, blade temperature approx. 600 ° C, power cord length 1 m. NOTE: The maximum operating time of the device without cooling down is 2 hours. Until then, a break of 30 minutes - 1 h should be taken to cool the device down.