Cyanoacrylate adhesive 50g thin ATK FIX 06

Cyanoacrylate adhesive ATK FIX 06 (sparse version) Adhesive with a very wide range of applications. It combines various materials very quickly. Setting time depending on the material 1s - 1 min. Proven version for over 25 years. in industrial and hobby applications. Importantly, it is a cyanoacrylate, which after applying to the moment of pressure, may take up to several minutes - not like most, where you need to press, after 2-3 seconds it will dry otherwise. The former name of the adhesive is MEGAFIX. Cyanoacrylate ATK FIX 06, rare, proven when gluing: rubber, plastics, metals, ceramics, laminates, wood-based plastics (e.g. MDF). It is used when we want to speed up bonding or immediately harden the adhesive on the surface. An additional effect of the activator when applied to the second glued surface is the increase in the strength of the joint by 20 to 30%. It does not affect the color, the joint remains colorless after use. ATK FILL: preparation in the form of a powder which, with ATK FIX glue, is suitable for filling cavities and strengthening the bonding by unrolling the surface. After hardening, the joint can be processed, for example, with a file or ground. Often used for bonding PU PRIMER plastics: an effective preparation supporting the bonding of PP, PE and silicone rubbers. In order to maintain the properties of the glue in the long term, it should be stored in a refrigerator or a freezer. Properties: Color: transparent Viscosity: 60 ... 80 [mPa s] Density: 1.06 [g / cm³] (20ºC) Max. Filling gap: 0.05mm Flash point (ISO2592)> 81 [ºC] Dielectric strength: 25 [kV mm] Tensile strength: 90 N / cm2 Available in packages: 50 ml. - standard 500 ml. - under the order (used for dosing systems)