Adhesive for wall plug ATK 812

Good cork adhesive ATK 812 Application: wall cork cork slats cork finishes for surfaces: brick, concrete, stone, painted walls wood fibreboards and chipboards gypsum and cardboard plasterboards metals such as steel, aluminum glass - for glass panels polystyrene and styrodur Advantages: neutral to surfaces neutral for the environment (no solvents) dense form allows you to "catch" immediately elastic after setting Included: ATK 812 glue white - 400 g (check also other colors) Degreaser 100g spray Instructions: degrease the glued surfaces if the surface is it is smooth, it is worth sanding lightly with sandpaper to increase the contact points and remove any varnishes and other layers.After production, apply the glue with lines at intervals of 3-5 cm so that after pressing the joint width does not exceed 2-3 cm. (the thickness may be greater, thanks to which you will eliminate the unevenness of the wall) press it to the surface and leave it to dry (if you want to harden faster, you can gently spray the surfaces with water, if possible) Remember: - If you want to glue small elements, use ATK FIX - if they are to be glued whole surfaces to each other use ATK U-800