ATK PU45 CLR transparent polyurethane resin

Perfectly transparent polyurethane resin with an elongation of up to 150% - odorless. Most often used for: in advertising companies as a resin for 3D stickers - doming in electronics as a filler for electronic systems in glassmaking as gluing large glass surfaces with each other and with other materials as a decorative resin - for gluing and pouring ornaments for flooding LEDs Used for gluing, potting and filling. metals plastics glass / ceramics stones cement composites wood Resistance to: water moisture engine oils xylene acetone gasoline UV light - not resistant to ethylacetate and methyl ethyl ketone - all of the above also at an elevated temperature of 60 degrees. Technical data: Open time: 20 minutes Setting time: 5 hours (full 24 hours) Color: none - perfectly transparent Elongation: up to 150% Hardness: 45D Viscosity: 800 cPs (does not leave air bubbles - easy to vent with thicker layers) Strength tensile strength: 8N / mm2 Resistivity (Ω • cm) - 1.2x10 Dielectric constant er - 2.8 Insulation strength (kV / mm): 21 Thermal conductivity (W / m • K): 0.20 Note: If there is no product, use the faster version - ATK PU CLEAR When you need a stiffer version, use ATK PU 42 Available packaging: 50 ml (2 x 25ml) - cartridge 1: 1 400 ml (2 x 200ml) - cartridge 1: 1 a large cartridge, in addition, a clamping nut was stirred. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist for a free visit!