Flexible adhesive for PP ATK 812

Flexible bonding and sealing of connections made of polypropylene and derivatives. Application: pp - polypropylene pp / epdm, pp+ t20, t+ 40 and other tpo-tpe-teo fillers and additives. Instructions: degrease the surface, if possible, rub with sandpaper of gradation min. 200-300 polypropylene in the glued places spray with ATK 822 or 8154 primer and wait 10-20 minutes, apply 812 glue and press so that the width of the glue after pressing is not greater than 2-3 cm. (if you want to stick a large element, apply the glue linearly with a distance of 5 cm) wait until fully bonded Included: ATK 812 glue black - 400 ml ATK 822 plastic primer - 500 ml spray Degreaser for 100 ml hard-to-glue ones is complex, however, below is the list of what you should choose if you have elements made of these plastics: - general pp, pe, pom, ptfe bonding to the butt and overlaps or at cracks on the basis of gluing the PP 1-02 reinforcement, e.g. a broken plastic barrel. - gluing small ATK FIX elements with primer - gluing pp, pe, pom and ptfe. - gluing polyethylene foams - U-800i 812 with ATK823 primer or warm ATK113. - bonding lamps and bumpers with pp, pp / epdm, pp+ .... pu16 with 822 primer - bonding and sealing surfaces pp ATK 812+ 822, pe ATK 812+ 823 (or see point 1)