PVC film adhesive B170

Availability:
not available
0 comments
Adhesive for professional use in bonding soft pvc in pool, pond, tunnel and construction films as well as pumped toys, the so-called inflatable jumping ropes. The connection is as strong as welding. We use it for medium and large damage.
Price: €33,81
Notify on availability
Add to favorites Refer a friend
See also
Adhesive for composite facade panels GB
Adhesive for composite facade panels GB
€55,93
Adhesive for copper gutters ATK EP61
Adhesive for copper gutters ATK EP61
€67,09
Adhesive for EPDM and PVC membranes - ATK 812
Adhesive for EPDM and PVC membranes - ATK 812
€4.993,03
Adhesive for galvanized and copper gutters EP61
Adhesive for galvanized and copper gutters EP61
€43,36
Adhesive for hinges and glass fittings ATK UV35
Adhesive for hinges and glass fittings ATK UV35
€100,00
Adhesive for metal gutters Acralock SA 1-15 NAT
Adhesive for metal gutters Acralock SA 1-15 NAT
€48,28
Description
Dictionaries
Comments

Adhesive for flexible PVC films - soft for medium, large and very large surfaces. Perfect application for: swimming pool films (protective, sliding, etc.) tunnel films water pond films - protection against leaves, protective tarpaulins, sliding closures, etc. (if in constant contact with water, use ATK 812) construction and insulation films trampolines - pumped jumping poles other related toys Instruction: 1. Stir the glue thoroughly before use. 2. Gently sand the glued elements at the point of gluing. Clean with a degreaser and let dry. 3. Apply an even and thin layer on the patch and the glued element. 4. Heat with a heat gun or dryer with pressure, if possible. 5. Full endurance from 12 to 24 hours. Package contents: ATK B170 adhesive (0.5l) Degreaser (isopropanol) 100 ml. We recommend using it in tandem with ATK FIX glue, which, after gluing B170, is used to finish corners, edges or small patches. If you need a PVC patch - you can buy it separately here.