Resin for ATK PU 45 convex stickers 400ml

Resin for convex stickers - production set One of the best products available on the market, thanks to which you can make 3D stickers. The viscosity has been slightly lowered so that any air bubbles themselves easily escape from the resin, and also causes a slightly higher efficiency - you use less resin for each sticker. The new construction of the agitator means: - more mixing elements - better mixing of the resin - up to 2x shorter agitator than the ones used now, this is a huge increase in comfort - no more agitators 30-40 cm. and the lack of any accuracy in pouring. You no longer have to maneuver the "rocket with such a long agitator" - now you have more control over the whole process. The resin is based on polyurethanes, therefore it is resistant to UV light (not epoxy resin). The hardness is semi-hard - delicate and pleasant to the touch for the customer. It sticks very well. We use it for: - 3D stickers with a printed base - potting metal and plastic key rings - pouring into molds Base: polyurethane resin Open time: 20 minutes Setting time: 5 hours (full 24 hours) Viscosity: 800 cPs. The complete set includes: ATK PU 45 CLR 3D sticker resin - 400ml Mixers / Stirrer - 3 pieces Degreaser based on isopropanol - 250ml Cartridge squeezer 1: 1