Resin for 3D stickers in a set with a squeezer and stirrers. One of the best products available on the market, thanks to which you can make 3D stickers. The viscosity has been slightly lowered so that any air bubbles themselves easily escape from the resin, and also causes a slightly higher efficiency - you use less resin for each sticker. New agitator: more mixing elements means better mixing of the resin spiral agitator instead of a square one means less air bubbles and faster work thin outlet tightly narrowed means no need to install narrowing needles, lower costs and more convenient application The resin is based on polyurethanes, therefore it is UV light resistant on epoxy resin). The hardness is semi-hard - delicate and pleasant to the touch for the customer. Application: 3D stickers - standard with print, pouring of key rings, key pendants, etc. pouring into molds and pouring objects Base: polyurethane resin Open time: 20 minutes Color: transparent Setting time: 5 hours (full 24 hours) Viscosity: 800 cPs. Packaging: 50 ml or 400 ml The complete set includes: ATK PU 45 CLR 3D sticker resin - 50 ml or 400 ml. (optional) Mixers / Stirrer - 3 pieces Isopropanol-based degreaser - 100 ml Cartridge squeezer 1: 1 50 ml. Note: In the absence of a product, use the faster version - ATK PU CLEAR When you need a stiffer version, use ATK PU 42
Comments