Adhesive for swimming pool and PVC mesh ATK 812

Glue to fix a cracked garden pool or a PVC pond even under water !!! The glue seamlessly glues together garden pools such as: BESTWAY *, INTEX * (expansion, rack, inflatable, etc.) * - official names of swimming pool manufacturers, most often chosen by customers. If you only have small holes, a mattress or a pontoon and you will be gluing dry, you can use ATK FIX glue. In the case of very large tears, we recommend ATK B170 glue. Using the described method, you can glue: holes and cracks in expansion and inflatable pools, ponds / ponds for fish, plant ponds, etc. PVC garden swimming pools for swimming, lined with PVC membrane, aesthetic and finishing elements such as: finishing strips , stones, anti-skid crossbars, sealing of outlet grates, etc. making joints at the sealing ends The application is very simple: you cut a PVC patch 2-3 cm larger than the crack itself. you wash the patch with a degreaser from the set (the best paper towel) you wash the crack with a degreaser or if you carefully wipe the place under water and rub it with sandpaper of 120-300 grit, apply the glue to the center or lengthwise so that the glue spreads over the entire surface and the thickness of the glue is min. 1 mm. (it can be even 1 cm if necessary) apply pressure so that the patch does not flow out or it does not leak from the outside under the pressure of water, although the glue itself is very dense full bonding about 24 hours depending on the temperature. The set includes: 1. Flexible PVC / PVC adhesive for pool foil ATK 812 - white 400g (see black or gray color availability) 2. 100 ml alcohol-based degreaser - for surface cleaning. (when gluing under water, we do not use) 3. A piece of PVC patch, approx. 30 x 30 cm - transparent. The connection is flexible, tight and 2x stronger than competitive adhesives (!), Completely safe glue without solvents and isocyanates.