Dispensing valves and tanks

In order to select the appropriate pressure head. contact us or see the description below. In the case of pressure vessels for adhesives and other liquids, the selection depends only on the amount of product consumed per day. If they are not large, up to 1-2 liters. a 3l stainless steel tank is enough. For larger ones, choose between 10l and 20l. Stainless steel tanks are available on request only. All versions are made in Poland! We have two types of heads: for one-component products such as cyanoacrylate adhesives, pastes, solvent and contact adhesives and aggressive fluids such as acids, we choose between J-120 heads - a needle-shaped valve, to more volatile and sensitive J-90 or J-180, thanks to which we completely separate the mechanical part from the fluid. The exception is the pressure head, which can operate up to 20 bar of "pushed" liquid, and the spray head - OZ-220 spray. The second category is valves for resins and two-component adhesives OZ-600 and 610. Here, the choice comes down to the viscosity of the product. For rare up to approx. 2000-4000 cpS. we recommend in the form of a monoblock - needle for more accurate portioning and faster reaction, and for the denser ones from 2000 cPs and larger portions above 3-5 ml. OZ-600-2. The exception is the 50J valve for 50 ml 1: 1 or 10: 1 cartridges and for direct administration from these packages.